a) Standard – playback in earphones of audiofile or folder* with audiofiles chosen from the library located on a flash card;
b) Synchrostart*. This mode allows to start playing at the same time a session and the MP3 audiofile. Time of audio playback is controlled by a session. Smooth reduction of audiofile loudness after the end of a session is provided if time of its playback exceeds session time;
Together with a session in this mode it can be chosen not only one audiofile, but the folder with audiofiles which will be playback one after another till the end of a session. If session is longer than the audiofile (or all files in the folder), then the file or the folder continue to be playback cyclically. It is made especially for short files with affirmation (aformation).
c) An audiostrobe – playback of the WAV files from library (or from the external device) having an audiostrobe signal at a frequency of 19200 Hz. The decoder provides a wide choice according to color schemes of playback *.
The strobe signal can be used as general – transferred to the left and right canals on all lines of LEDs (the traditional scheme) or the option “Chord” * when light-emitting diodes of a middle line flicker with a base frequency, but frequencies of top and bottom lines correlate to base frequency as chords. They change in a casual order in a number of values: 1:2(2:1), 5:3(3:5), 8:5(5:8), 3:2(2:3), 4:3(3:4), 5:4(4:5), 6:5(5:6), 9:8(8:9), 13:8(8:13), 15:8(8:15).
d) Lighting Rhythm * this mode is used in order to turn easily and simple any of your MP3 audiofile (music, the audioprogram for behavior modification, an affirmations (aformations), a training material, etc., etc. in an effective light-sound session). Feature of the mode is that the color scheme for a light stimulation depends on a frequency range of the playback file and reminds work of “light show”.
To red color there correspond the lower frequencies of an audio range, green – averages, blue – high. In each line of LEDs for the choice of color are used different values of frequencies. Level of brightness of light-emitting diodes in small limits changes depending on volume of sound in audiochannels.
For this mode three parameters one can choose (or set): range of frequencies for a light stimulation, the range of frequencies for audio stimulation and the mode (drawing) of frequency changing for a light stimulation. Stimulation lasts exactly as long as audiofile.
e) Dictaphone*. At the choice of the corresponding menu item monophonic record from the built-in microphone in the WAV format is carried out (sampling frequency – 8 kHz, bit depth – 16 bits). Names automatically are assigned to the created files on the basis of date and an order of record. Files can be playback in any mode of an audio-player.